IML/HDL/PKL고하중 볼스크류

SHUTON-IPIRANGA의 새로운 IML/HDL/PKL 제품군은 높은 동적 강성 및 고하중 볼스크류의 최첨단 기술입니다. 이는 플라스틱 사출, 프레스. 그리고 다른 까다로운 어플리케이션들을 위해 개발되었습니다.

SHUTON-IPIRANGA IML/HDL/PKL 볼스크류는 소음레벨을 낮추고, 높은 내구성과 속도로 훌륭한 결과를 제공합니다. 아주 부드러운 회전을 주는 최적화한 재순환 시스템의 싱글 너트 설계는 구동체의 설계를 단순화하고 작동을 최적화해 높은 동적 및 정적 부하용량과 높은 최대 힘 값을 얻을 수 있습니다.

Main Features:

• Top results with high durability and reliability.
• Especially high values of dynamic and static load capacity, as well as high values of maximum permissible loads.
• Very smooth rotation ensuring uniform ball circulation, avoiding any crashes between balls and resulting in very low noise levels and enabling the use of higher feed speed values, thus reaching DN values up to 170.000.
• Accuracy grade and axial play:
• H 0.020 mm or less.
• A 0.040 mm or less.

Depending on the application requirement of load capacity and speed, and in order to obtain the optimum life results in each case, SHUTON-IPIRANGA has developed three different types of HIGH LOAD ball screws:

IML high load technology

• It is designed for high load and high speed applications with DN up to 170.000.
• It is indicated when there is a high load resulting in high average force and at the same time medium and high speeds, resulting in a medium to high average speed.
• IML technology enables working temperature to be kept controlled.

HDL high load technology

• It is designed for very high load and moderate speed applications with DN up to 110.000.
• It is indicated when there is a high load, resulting in high average force, and at the same time low speeds, resulting in a low average speed.
• It is the option that gives a greatest dynamic, static load and rigidity.

PKL high load technology

• It is designed for applications with momentary extreme peak loads, where the average force does not have to be particularly high.
• Possibility of high speed, both in peak speed as in average speeds.

Optimized ball screw design by study of:

• Type of HIGH LOAD design.
• Shaft and nut thread geometry.
• Ball circuit distribution and position.
• Number of thread starts.
• Load distribution in HIGH LOAD ball screws.
• Tying method.
• Lubrication.

Nut detail: HIGH LOADS TS single nut (with 1 or 2 starts), with ball recirculation by U-type or B-type recirculation system.